Surplus Stepper Motor (12 Volt)

Solid, high quality 12 volt stepper motors that are compatible with the GadgetMaster II. May not look anything like this, but they will work great.

Surplus DC Motor (12 Volt, 100 mA)

Solid, high quality 12 volt DC motors that are compatible with the GadgetMaster II. May not look anything like this, but they will work great and the GadgetMaster II can run them in forward and reverse.

Snap Switch

Small, easy to mount, these switches are very handy for detecting "end of travel" and "home".

Photo Cell - Optical Sensors

These are super handy for detecting anything that changes from light to dark, great fun, especially with the analog input, the light bulb and the laser.

Thermistor - Temperature Sensors

Perfect for keeping track of room temperature using the Analog input on the GadgetMaster II.

Light Bulb on wire leads (12 Volt)

These little lights can be run directly from the GadgetMaster and the wire leads allow them to be connected right away.

Laser 3mW

These small diode lasers a very bright, with a 1.6 mrad divergence they project a 8mm spot at 5 meters. These lasers are setup to run from the Gadgetmaster II outputs so you can turn them off and on under computer control. Hey, every cool project needs a laser.

DANGER - Avoid direct eye exposure

A/B Switch

The A/B switch allows you to leave your printer and the GadgetMaster II connected so that you don't have to unplug connectors every time you want to print or run motors. (requires another parallel cable - see below)

Male/Male Parallel Cable - 6 ft

This is a high quality parallel cable with male/male connectors that plugs directly from a standard printer port to the GadgetMaster II.

Optional Euro 220V AC Adapter - 12Volts 800mA

With 800mA's of output this power supply is nicely matched to the GadgetMaster II. It's also nice and stable and it doesn't buzz like some of the other power supplies that we have tested.

24 Volt Option

Big power supply, 24 volts, 1.25 Amps, a modified GadgetMaster Board, a bigger hood to enclose a cooling fan, loads of power to move bigger steppers for industrial projects, thi option is required in addition to the standard GadgetMaster to run at this power level.

All prices are in U.S. dollars

Your Satisfaction is 100% Guaranteed - If you are not completely thrilled with your PC Gadgets purchase simply send it back for a complete refund.